share_log

Keysight Spotlights Spectrum Innovations at IMS 2024

Keysight Spotlights Spectrum Innovations at IMS 2024

Keysight在2024年的IMS展上聚焦于频谱创新。
Keysight Technologies ·  06/04 00:00

What: At the 2024 IEEE MTT-S International Microwave Symposium (IMS), Keysight's microwave and radio frequency (RF) experts will showcase solutions that accelerate spectrum innovations to help customers optimize 5G and pioneer 6G. With an end-to-end portfolio of product development solutions that quickly solve design, emulation, and test challenges, Keysight is reducing risk and speeding time-to-market for satellite and IoT networks, massive MIMO antennas, and 6G technology.

什么: 2024 IEEE MTT-S 国际微波研讨会 (IMS),是德科技的微波和射频(RF)专家将展示加速频谱创新的解决方案,以帮助客户优化5G和开拓6G。凭借可快速解决设计、仿真和测试挑战的端到端产品开发解决方案组合,是德科技正在降低风险并缩短卫星和物联网网络、大规模 MIMO 天线和 6G 技术的上市时间。

When: June 16 – 21, 2024

什么时候: 2024 年 6 月 16 日至 21 日

Where: Keysight Booth Number 721, Walter E. Washington Convention Center Washington DC

在哪里: 是德科技展位号 721,华盛顿特区沃尔特 E. 华盛顿会议中心

Contact: Paul Erwin to schedule media briefings and solution demonstrations.

联系人: 保罗·欧文 安排媒体发布会和解决方案演示。

Keysight will present the following demonstrations that are accelerating spectrum innovations:

是德科技将展示以下加速频谱创新的演示:

  • Wideband Active Load-Pull – Showcases Keysight's newly introduced wideband active load-pull (WALP) capability using a dual-channel VXG-C vector source and a PNA-X network analyzer to demonstrate the error vector magnitude performance of a power amplifier when presented with arbitrary frequency-dependent load impedances created without an impedance tuner.
  • AI/ML Enabled EDA – Demonstrates Keysight's ADS 2025, which offers 3D Circuit-EM-Thermal multi-physics co-design, high-performance automation enabling AI/ML and robust design validation for RF and millimeter-wave, and provides support for wideband power amplifier design techniques, including nonlinear load pull. Also shows how PathWave System Design 2024 U1 links to ADS through the new RF System Explorer as well as how ADS provides new communications PHY technology for 5G NTN systems design, while enabling training and use of AI/ML-based models, channels, provides RF-true phased array design for 5G and 6G systems.
  • Phased Array Antenna Test – Showcases Keysight's phased array control and calibration test solution inside the Vertical Compact Antenna Test Range (CATR), which accommodates a wide variety of phased array antenna performance verification tests including fast gain and phase calibration, effective isotropic radiated power (EIRP), antenna radiation pattern, antenna gain-to-noise-temperature (G/T), modulation distortion, and radio frequency to direct digital measurements.
  • Signal Source Characterization – Demonstrates how to perform sub-THz phase noise measurements with Keysight's new E5058A 54 GHz SSA-X signal source analyzer and an E5051AW phase noise measurement downconverter for 6G applications and microwave amplifier residual phase noise and AM noise measurements.
  • IQ Data Characterization – Highlights how Keysight's vector signal analysis software uses a new feature to precisely characterize a homodyne (IQ) systems by characterizing and digitally correcting the frequency-dependent dispersion and imbalance of a Marki IQ mixer.
  • 宽带主动负载牵引 — 展示是德科技新推出的宽带主动负载牵引 (WALP) 功能,该功能使用双通道 VXG-C 矢量源和 PNA-X 网络分析仪,演示功率放大器在没有阻抗调谐器的情况下产生的任意频率相关负载阻抗时的误差矢量幅度性能。
  • 支持人工智能/机器学习的 EDA — 演示是德科技的 ADS 2025,它提供三维电路电磁热多物理场协同设计、支持 AI/ML 的高性能自动化以及射频和毫米波的可靠设计验证,并支持宽带功率放大器设计技术,包括非线性负载拉动。还展示了PathWave System Design 2024 U1如何通过新的射频系统浏览器连接到ADS,以及ADS如何为5G NTN系统设计提供新的通信物理层技术,同时支持基于人工智能/机器学习的模型和通道的训练和使用,为5G和6G系统提供真正的射频相控阵设计。
  • 相控阵天线测试 — 在垂直紧凑型天线测试范围 (CATR) 内展示是德科技的相控阵控制和校准测试解决方案,该解决方案可容纳各种相控阵天线性能验证测试,包括快速增益和相位校准、有效各向同性辐射功率 (EIRP)、天线辐射方向图、天线增益噪声温度 (G/T)、调制失真以及用于指导数字测量的无线电频率。
  • 信号源特性分析 — 演示如何使用是德科技全新 E5058A 54 GHz SSA-X 信号源分析仪和适用于 6G 应用的 E5051AW 相位噪声测量下变频器进行亚太赫兹的相位噪声测量,以及微波放大器残余相位噪声和 AM 噪声测量。
  • IQ 数据特征 — 重点介绍是德科技的矢量信号分析软件如何使用一项新功能,通过表征和数字校正Marki IQ混频器的频率相关色散和不平衡来精确地表征零差(IQ)系统。

Keysight's experts will also explore spectrum innovation through technical lectures, presentations, workshops, and tutorials including:

是德科技的专家还将通过技术讲座、演讲、研讨会和教程探索频谱创新,包括:

Panel Sessions

小组会议

  • RF and Microwave League of Champions
  • 射频和微波冠军联赛

June 17 – 8:00 a.m.-5:20 p.m.

6月17日—上午8点至下午5点20分

Room # 207AB

房间号 207AB

June 16 – 8:00-11:50 a.m.

6月16日 — 上午 8:00-11:50

Room # 206

206 号房间

Industry Workshops

行业研讨会

  • Model-Based Design of Stable High Efficiency GaN Power Amplifiers
  • Design Flow for the Assembly and Analysis of 3D Heterogenours Intergrated Technologies
  • 基于模型的稳定高效氮化镓功率放大器的设计
  • 三维异构集成技术装配和分析的设计流程

MicroApps Seminars

微应用研讨会

  • External Optimization and AI/ML Training of a 3GHz Filter Using Python in ADS
  • Using Load Pull Simulation and Optimization to Design Doherty Power Amplifiers
  • 在 ADS 中使用 Python 对 3GHz 滤波器进行外部优化和 AI/ML 训练
  • 使用负载牵引仿真和优化来设计 Doherty 功率放大器

For additional information, visit Keysight at IMS 2024.

如需更多信息,请访问 是德科技参加 IMS 2024

About Keysight Technologies

关于是德科技

At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we're delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product life cycle. We're a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com.

在是德科技(纽约证券交易所代码:KEYS),我们激励和授权创新者将改变世界的技术变为现实。作为一家标普500指数公司,我们正在提供市场领先的设计、仿真和测试解决方案,以帮助工程师在整个产品生命周期中以更低的风险更快地进行开发和部署。我们是全球创新合作伙伴,使通信、工业自动化、航空航天和国防、汽车、半导体和通用电子市场的客户能够加速创新,以连接和保护世界。要了解更多,请访问 是德科技新闻编辑室www.keysigh

声明:本内容仅用作提供资讯及教育之目的,不构成对任何特定投资或投资策略的推荐或认可。 更多信息
    抢沙发