Velo3D, Inc. Receives Continued Listing Standards Notice from the NYSE
July 12, 2024 Download as PDF
FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced that on July 8, 2024 it received notice from the New York Stock Exchange ("NYSE") that it is not in compliance with Section 802.01B of the NYSE Listed Company Manual because its average total market capitalization over a consecutive 30 trading-day period was less than $50 million and, at the same time, its stockholders' equity was less than $50 million. As of July 5, 2024, the company's 30 trading-day average market capitalization was approximately $36.6 million and its last reported stockholders' deficit, as of March 31, 2024, was approximately ($45.5) million.
In accordance with NYSE procedures, within 45 days from receipt of the notice, the company intends to submit a plan to the NYSE advising it of the definitive action(s) the company has taken, is taking, or plans to take to regain compliance with the continued listing standards. If the NYSE accepts the company's plan, the company's common stock will continue to be listed and traded on the NYSE during the 18-month cure period, subject to the company's compliance with other NYSE continued listing standards and continued periodic review by the NYSE of the company's progress with respect to its plan.
The notice has no immediate impact on the listing of the company's common stock and does not affect the company's reporting obligations with the U.S. Securities and Exchange Commission.
In addition, in a separate letter dated June 28, 2024, the NYSE confirmed that a calculation of the company's average stock price for the 30 trading days ended June 28, 2024, indicated that the company's stock price was above the NYSE's minimum requirement of $1 based on a 30 trading-day average. Accordingly, as of June 28, 2024, the Company was no longer considered below the $1 continued listing criterion.
About Velo3D:
Velo3D is a metal 3D printing technology company. 3D printing—also known as additive manufacturing (AM)—has a unique ability to improve the way high-value metal parts are built. However, legacy metal AM has been greatly limited in its capabilities since its invention almost 30 years ago. This has prevented the technology from being used to create the most valuable and impactful parts, restricting its use to specific niches where the limitations were acceptable.
Velo3D has overcome these limitations so engineers can design and print the parts they want. The company's solution unlocks a wide breadth of design freedom and enables customers in space exploration, aviation, power generation, energy, and semiconductor to innovate the future in their respective industries. Using Velo3D, these customers can now build mission-critical metal parts that were previously impossible to manufacture. The fully integrated solution includes the Flow print preparation software, the Sapphire family of printers, and the Assure quality control system—all of which are powered by Velo3D's manufacturing process. The company delivered its first Sapphire system in 2018 and has been a strategic partner to innovators such as SpaceX, Aerojet Rocketdyne, Lockheed Martin, Avio, and General Motors. Velo3D has been named as one of Fast Company's Most Innovative Companies for 2023. For more information, please visit Velo3D.com, or follow the company on LinkedIn or X (formerly known as Twitter).
VELO, VELO3D, SAPPHIRE and INTELLIGENT FUSION are registered trademarks of Velo3D, Inc.; and WITHOUT COMPROMISE, FLOW and ASSURE are trademarks of Velo3D, Inc. All Rights Reserved Velo3D, Inc.
Forward-Looking Statements:
This press release includes "forward-looking statements" within the meaning of the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1996. The company's actual results may differ from its expectations, estimates and projections and consequently, you should not rely on these forward-looking statements as predictions of future events. Words such as "expect", "estimate", "project", "budget", "forecast", "anticipate", "intend", "plan", "may", "will", "could", "should", "believes", "predicts", "potential", "continue", and similar expressions are intended to identify such forward-looking statements. These forward-looking statements include, without limitation, statements regarding the company's ability to regain or maintain compliance with NYSE continued listing standards and the company's other expectations, beliefs, intentions or strategies for the future. These forward-looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results. You should carefully consider the risks and uncertainties described in the "Risk Factors" section of the company's Annual Report on Form 10-K for the fiscal year ended December 31, 2023 (the "FY 2023 10-K"), which was filed by the company with the SEC on April 3, 2024, and the company's Quarterly Report on Form 10-Q for the fiscal quarter ended March 31, 2024, which was filed by the company with the SEC on May 15, 2024, and the other documents filed by the company from time to time with the SEC. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Most of these factors are outside the company's control and are difficult to predict. The company cautions not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date made. The company does not undertake or accept any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based.
View source version on businesswire.com:
Investor Relations:
Velo3D
Bob Okunski, VP Investor Relations
investors@velo3d.com
Media Contact:
Velo3D
Dan Sorensen, Senior Director of PR
press@velo3d.com
Source: Velo3D, Inc.
Released July 12, 2024
Velo3D、Inc.がNYSEからの継続的上場基準の通知書を受領
2024年7月12日 PDFとしてダウンロード
カリフォルニア州フリーモント--(BUSINESS WIRE) -- Velo3D, Inc. (NYSE:VLD)は、ミッションクリティカルな金属部品のアドイティブな製造技術企業のリーディングカンパニーとして、2024年7月8日に、30営業日連続での平均総時価総額が5000万ドル未満で、同時に株主資本が5000万ドル未満であるため、NYSE Listed Company Manualのセクション8020.1億にコンプライアンスしていないことをNYSEから通知を受けたことを発表しました。2024年7月5日時点で、同社の30営業日の平均時価総額は約3660万ドルで、最後に報告された株主資本欠損は2024年3月31日時点で約(45.5)百万ドルです。
NYSE手続きに従い、通知受領後45日以内に、同社はNYSEに提出することを意図しています。この提出物は、同社が持続的なリスティング基準に準拠するために同社が実施した、実施している、または実施する決定的な行動をNYSEに通知するものです。 NYSEが同社の計画を承認した場合、同社の普通株式は18ヶ月の治療期間中に引き続きNYSEにリスティングされ、同社が他のNYSE持続的リスティング基準に適合し、NYSEが同社の計画に関する進捗状況を継続的に審査したことを前提に、取引されます。
この通知は、同社の普通株式のリスティングに直接的な影響を与えず、同社の米国証券取引委員会への報告義務に影響を与えることはありません。
さらに、2024年6月28日付けの別の書簡にて、NYSEは、2024年6月28日までの30営業日の平均株価の計算により、同社の株価が30営業日の平均を基にした最低要件である1ドル以上であることを確認しました。したがって、2024年6月28日時点で、同社は1ドル未満の持続的なリスティング基準を下回さなくなりました。
Velo3Dは、金属3Dプリント技術企業です。 3Dプリント、またはアディティブ・マニュファクチャリング(AM)は、高付加価値金属部品の製造方法を改善する独自の能力を持っています。ただし、ほぼ30年前に発明されたレガシー金属AMには、その能力が大幅に制限されています。これにより、価値が高く、影響力のある部品を作成するための技術が制限され、特定のニッチ市場以外ではその制限が許容される範囲にとどまっていました。
Velo3Dは金属製3Dプリント技術企業です。 3Dプリンティング(アディティブマニュファクチャリング)には、高価値の金属部品を作る方法を改善する独自の能力があります。ただし、約30年前に発明されて以来、従来の金属製造はその機能が大幅に制限されてきました。これにより、最も価値のある部品の作成には使用できず、特定のニッチでのみ使用可能でした。
Velo3Dは、設計者が必要な部品を設計して印刷できるようにしました。同社のソリューションは、幅広い設計の自由度を解除し、宇宙探査、航空、発電、エネルギー、半導体などの各産業における顧客が将来の革新を実現する手段を提供しています。これらの顧客は、Velo3Dを使用して、以前に製造不可能だったミッションクリティカルな金属部品を製造できるようになりました。完全に統合されたソリューションには、Flowプリント準備ソフトウェア、Sapphireファミリーのプリンター、およびAssure品質管理システムが含まれており、すべての製造プロセスはVelo3Dの製造プロセスによるものです。同社は、2018年に最初のSapphireシステムを納入し、SpaceX、Aerojet Rocketdyne、Lockheed Martin、Avio、General Motorsなどの革新スタートアップの戦略的パートナーでした。Velo3Dは、2023年のFast Company's Most Innovative Companiesで1つとして名を連ねています。詳細については、Velo3D.comを訪問するか、LinkedInまたはX(元Twitter)で同社をフォローしてください。
VELO、VELO3D、SAPPHIRE、INTELLIGENt FUSIONは、Velo3D、Inc.の登録商標です。また、WITHOUT COMPROMISE、FLOW、およびASSUREは、Velo3D、Inc.の商標です。すべての権利を保有しています。Velo3D、Inc。
前向きな声明:
このプレスリリースには、「安全な港」としての民事訴訟改革法(PSLRA)の規定に従う"前向き見通しに関する声明"が含まれています。同社の実際の結果は、期待、見積もり、および予測と異なることがあります。 「期待」、「見積もり」、「プロジェクト」、「予算」、「予測」、「予期する」、「意図する」、「計画する」、「可能性がある」、「将来に向けて革新する」などの用語は、このような前向き見通しに関する声明を特定するために使用されます。これらの前向き見通しに関する声明には、同社がNYSEE持続的リスティング基準に準拠するためにどのような行動を取っている、取る、または取る予定であるか、同社のその他の期待、信念、意図、または戦略を含みます将来。これらの前向き見通しに関する声明には、実際の結果が期待される結果と異なる可能性がある重要なリスクと不確実性が含まれており、実際のイベントおよび結果を前向き見通しに含まれるものとは異なる可能性があります。同社は、FY2023 10-K(同社が2024年4月3日にSECに申請した)の「リスクファクター」部分、同社が2024年5月15日にSECに申請した第1四半期の10-Q、SECに報告する既存の文書、同社が時々申請する他の重要なリスクや不確実性について慎重に検討する必要があります。これらの申請には、前向き見通しに関する声明に含まれる内容とは異なる重要なリスクや不確実性が識別され、取り上げられています。これらの記述は、同社のコントロール外であり、予測するのが困難な場合が多いです。同社は、作成時点で有効な見通しのみを含め、いかなる前向き見通しに関する声明も過度に依存しないよう注意することを勧めます。同社は、期待またはイベント、状況、または環境の変化に基づく前向き見通しに関する声明のいかなる更新または修正を公式に発表し、リリースする義務も責任も負いません。
ビジネスワイヤコムのソースバージョンを見る:
投資家関係:
Velo3D
VP Investor RelationsのBob Okunski
investors@velo3d.com
メディア連絡先:
Velo3D
シニアディレクターオブPRのDan Sorensen
press@velo3d.com
出典: Velo3D株式会社。
2024年7月12日出荷